Expert Knowledge

Exceptional Service

Lowest Prices

SM Designs YouTube Airbrush Tutorials Facebook Facebook
SM Designs - Airbrush Paint super store Sales / Service / Support: 028 2564 7237

FREE DELIVERY

delivery

UK & Ireland on orders over £100

Basket
 
 
SM Designs are the official European distributor for Createx airbrush
colors, Auto Air colors, Wicked colors and Autoborne colors.
Auto-Air Createx Wicked Illustration Airbrushes Accessories

4967E Candy2O Set E Cool

more info
Availability: In Stock

Choose a variant:

4967-E (12 x 120ml)   £154.68   £139.21 (5 items available)
Buy item(s)

Candy2-O Set E - Cool 12

Includes 120ml of each of the following:

4653 Lemon Yellow             4661 Emerald Green               4030 Intercoat Clear 

4656 Midnight Blue              4662 Dirt Track Brown           4012 High Performance Reducer

4657 Caribe Blue                 4663 Red Oxide                        4100 Aluminium Base

4658 Ultra Violet                  4664 Black

Candy-2-0 – TRUE CANDY PERFORMANCE

Auto Air Colors cutting edge Water-based Candy Dye Technology

Brilliant transparent colors for custom refinishing and airbrushing.  Candy20 combine advanced water-soluble, urethane resin technology with crystal-clear dyes to create truly exceptional candy colors.

Candy-2-0 are:

·         concentrate.  Add 10% per volume (9:1 mix ratio) 4030 Intercoat for spray performance.  Optional lowering of viscosity is achieved by reducing with either 4012 High Performance or 4020 Automotive Reducer.

·         intense.  4 – 6 medium wet coats are recommended for full color saturation.  Allow each coat to air dry tack free prior; approximately 10 minutes flash time in between coats when painting in non-humid, temperate conditions.

·         are made for the graphic arts with excellent adhesion so they will not lift or peel when taped on.  Apply 4030 Intercoat direct over air-dried candy20 to prevent bleeding when applying other colors and marking when taping. 

 

·         work with a wide variety of spray-gun and airbrushes.  The following specs are recommended as a starting point.  As always, achieving a finely atomized spray pattern is the goal.  Reduce and adjust settings & psi to achieve a spray pattern that is smooth and free of large, color droplets or a “grainy” over-spray look.

          spray-gun: 1.2 – 1.3mm tip, 25 – 35 psi

          mini-gun: 0.8 – 1.0mm, 25 – 35 psi

          airbrush: 0.5mm - mixing with 4030 generally enough, smaller tip-sizes reduce with 4012 High

performance or 4020 Automotive Reducer as needed to achieve optimum atomization

 


Write a review

Your Name:


Your E-mail:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: